Aasiaat

Residential areas

Open-low housing

The area is to be used for residential purposes with open-low residential buildings in the shape of detached single-family houses

The area covers an area of some 5 ha

New buildings are to have a maximum height of two storeys.

The area is fully developed without any available space

Road access to the area is to be from Peter Siegstadsvej, Tipitooq and Tipituup Qaava

The area is designated a preservation-worthy area (section-3 area).

Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway. The area is located under the obstacle limitation surface at the airport and is covered by approach and take-off surfaces. The maximum ridge level of buildings and facilities and the construction level of roads are variable and depend on the distance to the runway and a right-angled distance from the centre line. The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 61.0 metres and roads no higher than level 56.0 metres.

New buildings are to be adapted to existing buildings in the area as regards location, design and type of development. Small-scale keeping of dogs may be permitted near existing housing. In case of new building, extension and rehabilitation of existing buildings, the area’s uniformity and minor variations in the development as a whole and the architecture of each building are to be preserved and possibly developed further. A few dog keeping areas may be zoned near existing housing in the area