Aasiaat

Residential areas

Mixed residential areas

The area is to be used for residential purposes with open-low residential buildings in the shape of detached single-family houses, dense-low residential buildings such as terraced houses etc. as well as residential multi-storey buildings

The area covers an area of some 18 ha

In detail areas A21.1, A21.2, A21.3 and A21.4, new buildings are to have a maximum height of one storey

The area can hold another 15 homes, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area is considered fully developed without any available space in the area.

Road access to the area is to be from Pujooriarfiup Saqqaa, Qimmeqarfik and Tipitooq Kangilleq

No special provisions

Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway. The area is located under the obstacle limitation surface at the airport and is covered by approach and take-off surfaces. The maximum ridge level of buildings and facilities and the construction level of roads are variable and depend on the distance to the runway and a right-angled distance from the centre line. The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 61.0 metres and roads no higher than level 56.0 metres.

No special provisions