1000-B05 Port
1000-B05 (en)
-
Location – town/settlement
Aasiaat
-
Purpose
Areas for industry and ports
-
Specific use
Areas for industry and ports
-
Use
The area is to be used for port purposes involving dock and pier facilities, terminal functions and similar port facilities. The offshore area may be used for anchoring and mooring
-
Current conditions
The area covers an area of some 4 ha
-
Building provisions
Fish trade buildings are to have a maximum height of eight metres. Sheds and repair shops are to have a maximum height of 1 storey
-
Remaining available space
The area has 5,000 m² of available space, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area is considered fully developed without any available space in the area.
-
Traffic service and utilities
Road access to the area is to be from Tipitooq Kangilleq
-
Listed, protected and preservation-worthy features
No special provisions
-
Regulated zones
Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway. The area is located under the obstacle limitation surface at the airport and is covered by approach and take-off surfaces. The maximum ridge level of buildings and facilities and the construction level of roads are variable and depend on the distance to the runway and a right-angled distance from the centre line. The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 61.0 metres and roads no higher than level 56.0 metres. A safety zone has been established around the airport’s lights for approach, therefor buildings, vehicles on the roads, et cetera, may not pierce through the surface of light.
-
Special provisions
In connection with the establishment of a fishing port and drying ground etc., blasting and filling may be carried out to the extent necessary